I am having the same problem. I have more than 300 DVRs and the SmartPSS black UI (ver 2.003.0000004.0.R.201021) does not have p2p access to some of them. But SmartPSS with the gray UI (ver 1.13.1) connects to the same DVR. It looks like a bug in the new version of the program. I wrote an email about this issue to Dahua, but they didn’t reply
Description. For an HDCVI camera, you can use the coaxial cable to control the OSD menu. All the menu paths in this chapter are for reference only, there is slight difference between different menus, please refer to the actual interface for more details. There are mainly 10 kinds of camera menu, please select according to the actual product. Motion Recording Troubleshoot. Some settings will cause motion detection not detected When you have some issue with motion detection, please check these settings. Step by Step Instructions. 1. Get into the Playback view by using your mouse. Right Click to bring up the Menu below: 2. You will then see the following Menu: At 2x fast forward, 2 seconds of video will need to be processed every 1 second. At 4x, 4 seconds will have to be processed in 1 second. If your NVR cannot display a full 4 camera grid of 4MP cameras, processing 1sec per 1sec, it will not be able to process a 4MP camera 4 seconds to every 1 second. Exception on Live View 1. Please go to Menu>Settings>Network Setup> and at the bottom of that screen you should see Wired Connected and Internet Connected. If not, check to make sure your Ethernet cable is securely inserted in the DVR+ (CM-7500) port and in the router/modem at the other end. 2. Try connecting to a different port on your modem/router as there may be
7. This file will be used in the password reset process. Contact Dahua technical support via one of the methods HERE for the result file. Once you recieve the Result file, select Open and choose the file on your file system. Click Next. 8. If the Result file is accepted, it will allow you to set the new password.
If brand is not listed, you will need to set the IP camera to the ONVIF protocol from the camera itself if it is available as an option. 4. Enter the IP address of the 3rd party camera. 5. Default ports are RTSP port 554 and HTTP Port 80. It is possible the third party camera are on different ports than what is showing on the Dahua recorder. KK9Iq0g.
  • km7yskv84k.pages.dev/430
  • km7yskv84k.pages.dev/470
  • km7yskv84k.pages.dev/157
  • km7yskv84k.pages.dev/406
  • km7yskv84k.pages.dev/130
  • km7yskv84k.pages.dev/337
  • km7yskv84k.pages.dev/227
  • km7yskv84k.pages.dev/294

    • dahua dvr not displaying